Speed Calling:

Speed Calling helps you:

Ø      Save time _ Speed Calling allows you to save time looking up and dialing telephone numbers or access codes.

Ø      Convenient _ With Speed Calling, you can program telephone numbers you call often, long distance numbers, access codes for telephone services, or a combination of numbers. And the service can be used from any telephone on your home or business line.

Ø      Flexible _ You can easily change the numbers on your Speed Calling list, as often as you would like.

Ø      Peace of mind _ Many customers use Speed Calling codes for emergency contact numbers such as doctors, police, fire, medical, etc., so that in an emergency they don't have to remember or look up these numbers.

Customers with either touchtone or rotary service can subscribe to Speed Calling. Any combination of local and long distance numbers, service access codes, and 3-digit numbers (such as 9-1-1 ) can be entered into the Speed Calling list. If an incorrect or unassigned Speed Calling code is dialed, you will hear a fast busy signal. Any part of a Three-Way or Six-Way Call can be dialed using Speed Calling service.

To Set-Up Speed Calling List:

1.  Lift the receiver and listen for dial tone.

2.  Dial the Speed Calling 8 access code, *74 (1174 on a rotary dial telephone) for Speed Calling 8.

     <Or>

Dial the Speed Calling 30 access code, *75 (1175 on a rotary dial telephone) for Speed Calling 30.

3.  Listen for dial tone.

4.  Dial the 1- or 2-digit code you would like to program.  (Speed Calling 8      uses 2 through 9.  Speed Calling 30 uses 20 through 49.)

5.  Dial the telephone number (including area code if needed) or the access code that you want to program for that Speed Calling code.

6.  Press the # key.  You will hear three beeps and dial tone which confirms that the number has been entered.

7.  Repeat steps 2 through 6 for each number you want to program on your Speed Calling list.  Up to 8 codes can be programmed with Speed Calling 8 and up to 30 codes can be programmed with Speed Calling 30.

8.  Hang up the receiver when you are finished entering numbers into the Speed Calling list.

To Dial Numbers Using Speed Calling:

1.  Lift the receiver and listen for dial tone.

2.  Dial the one- or two-digit Speed Calling code for the telephone number access code you want to          call.  (Speed Calling 8 uses 2 through 9.  Speed Calling 30 uses 20 through 49.)

3.  Press the # key.

4.  The telephone number/access code will be automatically dialed.

To Change Numbers Programmed in Speed Calling List:

1.  Lift the receiver and listen for dial tone.

2.  Dial the Speed Calling 8 access code, *74 (1174 on a rotary dial telephone) for Speed Calling 8.

     <Or>

Dial the Speed Calling 30 access code, *75 (1175 on a rotary dial telephone) for Speed Calling 30.

3.  Listen for dial tone.

4.  To change a telephone number on the Speed Calling list, dial the one- or two-digit code you would like to re-program.  (Speed Calling 8 uses 2 through 9.  Speed Calling 30 uses 20 through 49.)

5.  Dial the new telephone number (including area code if needed) or the access code that you want to program in your Speed Calling list.

6.  Press the # key.  You will hear three beeps which confirms that the number has been entered.

7.  Repeat steps 2 through 6 for each code you want to re-program on the list.

8.  Hang up the receiver when you are finished updating your Speed Calling list.